Technico, 103 Udyog Bhavan, Sonawala Road, Goregaon (E), Mumbai 400063, INDIA Tel: +91 22 26862556
Fax: +91 22 26862558 E-mail:info@technico.in © 2008 All Rights Reserved
Fax: +91 22 26862558 E-mail:info@technico.in © 2008 All Rights Reserved
TECHNICO
IGT - AIC2 5T 2000 Printability Tester
Introduction
The AIC2-5 Printability Tester can be used for making numerous tests on different substrates and inks in quality control and research. Small quantities of Ink and Substrate can be tested in conditions simulating actual practice. Color strips can be printed using various inks on different substrates, which can be used for numerous purposes such as:- measuring color using color measuring systems / spectrophotometers, testing print quality, picking, wet pick and wet repellence, Heliotest, roughness, set-off, mottle, linting, etc., visual appraisal, determination of ink transfer, adhesion and gloss.
Applications
Paper, Board, Plastic Film, Cellophane, Laminate, Metal, etc.
Specifications
Printing Unit
· Printing Speed: constant 0.2 - 5 m/s increasing 0.5 - 7 m/s
· Printing Force: 50 - 1000 N
· Extra interval time: 0.2 - 120 s
· Number of printing discs: maximum 2
Printing Discs
· Printing width: 10, 20, 35, and 50 mm
· Printing length: 200 mm
· Types:
- Rubber coated, for conventional inks
- Rubber blanket for conventional inks
- Rubber for UV-curing inks
- Rubber blanket for UV-curing inks
- Aluminium
Features
· Many accessories available for a very wide range of processing possibilities for various substrates and
offset, gravure and flexo inks; substrate, ink and printing form are simple and quick to change.
· Sturdy construction for intensive use over a long period; easy and quick to clean
· Reproducibility is extremely good, high degree of simulation of actual practice
· Suitable for two printing forms
· Maximum printing width 50 mm
· Repeatability and reproducibility is extremely good
The AIC2-5 Printability Tester can be used for making numerous tests on different substrates and inks in quality control and research. Small quantities of Ink and Substrate can be tested in conditions simulating actual practice. Color strips can be printed using various inks on different substrates, which can be used for numerous purposes such as:- measuring color using color measuring systems / spectrophotometers, testing print quality, picking, wet pick and wet repellence, Heliotest, roughness, set-off, mottle, linting, etc., visual appraisal, determination of ink transfer, adhesion and gloss.
Applications
Paper, Board, Plastic Film, Cellophane, Laminate, Metal, etc.
Specifications
Printing Unit
· Printing Speed: constant 0.2 - 5 m/s increasing 0.5 - 7 m/s
· Printing Force: 50 - 1000 N
· Extra interval time: 0.2 - 120 s
· Number of printing discs: maximum 2
Printing Discs
· Printing width: 10, 20, 35, and 50 mm
· Printing length: 200 mm
· Types:
- Rubber coated, for conventional inks
- Rubber blanket for conventional inks
- Rubber for UV-curing inks
- Rubber blanket for UV-curing inks
- Aluminium
Features
· Many accessories available for a very wide range of processing possibilities for various substrates and
offset, gravure and flexo inks; substrate, ink and printing form are simple and quick to change.
· Sturdy construction for intensive use over a long period; easy and quick to clean
· Reproducibility is extremely good, high degree of simulation of actual practice
· Suitable for two printing forms
· Maximum printing width 50 mm
· Repeatability and reproducibility is extremely good
Principals
Adirondack
Akribi
Huygen
IGT
Kaltec
Kalamazoo
Pulmac
Techpap
Technidyne
TMI
Akribi
Huygen
IGT
Kaltec
Kalamazoo
Pulmac
Techpap
Technidyne
TMI
